Close
Search
Banner Banner
Products
請選擇分類
TAKEX_GN

Compact Embedded Amplifier Photo Sensors

  • TAKEX GN Series compact side-on photo sensors offer through-beam, polarized retroreflective, diffuse reflective, and convergent reflective sensing from 1 mm to 10 m.
  • The lineup includes red or infrared LEDs, NPN/PNP outputs, cable or M8 connection, 1 ms response, and IP67 protection.
  • Brand TAKEX Takenaka Engineering Co., Ltd.
Features
  • Compact side-on design: The slim and lightweight housing saves installation space, while the flat lens helps reduce dust and dirt accumulation.
  • Four sensing methods: The lineup includes through-beam, polarized retroreflective, diffuse reflective, and convergent reflective models for different target and installation requirements.
  • Detection up to 10 m: GN-T10CR models provide a 10 m through-beam sensing range, with additional 7 m through-beam, 1.3 m retroreflective, and multiple reflective ranges.
  • NPN or PNP outputs: Major sensing configurations are available with NPN or PNP open-collector outputs and selectable Light-ON/Dark-ON operation.
  • Cable or M8 connection: Standard attached-cable models and M8 connector versions with the -J suffix are available throughout the lineup.
Specification
ItemSpec.
Product typeCompact embedded amplifier photo sensor
Detection methodsThrough beam, polarized retroreflective, diffuse reflective, convergent reflective
Power supply12–24VDC ±10%, ripple 10% or less
Control outputNPN or PNP open collector, depending on model
Operation modeLight-ON / Dark-ON selectable
Response time1 ms or less
Operation indicatorOrange LED
Stability indicatorGreen LED
Case materialPBT
Lens materialMethacrylic resin
Ambient light5,000 lx or less
Operating temperature−25 to +55°C, non-freezing
Ambient humidity35–85% RH, non-condensing
Protective structureIP67

Specification notes

  • Model selection is primarily based on sensing method and range: through-beam models reach up to 10 m, polarized retroreflective models reach 1.3 m, diffuse reflective models cover 70, 300, and 400 mm, and convergent reflective models cover 3–30 mm or 1–40 mm.
  • Through-beam models support GNP1, GNP2, GNP3, and GNP5-1 pinhole plates to reduce detectable object size or operating width. Sensitivity adjustment can further support small or nearly transparent objects.
  • Red LED through-beam models support GN-PFA and GN-PFB interference prevention filters. With the filters installed, the detecting distance is 5 m.
FAQ

Q1: What is the TAKEX GN Series?
A: The GN Series consists of compact, slim side-on embedded amplifier photo sensors for space-saving equipment installation.


Q2: What detection methods are available?
A: The lineup includes through-beam, polarized retroreflective, diffuse reflective, and convergent reflective sensing.


Q3: What is the maximum detecting distance?
A: GN-T10CR and GN-T10CRPN provide a maximum through-beam detecting distance of 10 m.


Q4: Are red and infrared light sources available?
A: Yes. Red LED and infrared LED models are available depending on the sensing method and range.


Q5: Are both NPN and PNP outputs available?
A: Yes. Major sensing configurations are available with either NPN or PNP open-collector output.


Q6: Is Light-ON/Dark-ON operation selectable?
A: Yes. The operation mode can be switched between Light-ON and Dark-ON.


Q7: What is the response time?
A: The main GN Series sensing models provide a response time of 1 ms or less.


Q8: Are M8 connector models available?
A: Yes. Main models are also available in -J versions with M8 connectors.


Q9: Can the GN Series detect smaller objects?
A: Through-beam models can use optional pinhole plates to reduce detectable object size or operating width.


Q10: What applications are suitable for the GN Series?
A: Applications include general machinery, logistics, precision machinery, electronic components, automatic faucets, and AGV arrival detection.

File Downloads
File Name
File Type
Download
Compact Embedded Amplifier Photo Sensors GN Series_E
PDF
0
Go top