13 mm Slim Through-Beam Bin-Picking Sensors
| Item | Spec. |
|---|---|
| Product type | 13 mm slim through-beam bin-picking sensor |
| Current models | SSP-T205 SSP-T210 SSP-T213 SSP-T216 SSP-T205-PJ SSP-T210-PJ SSP-T213-PJ SSP-T216-PJ |
| Detection method | Through beam |
| Detecting distance | 2 m |
| Min. detection object | Opaque object Φ35 mm or larger |
| Number of optical axes | 5, 10, 13, 16 |
| Beam interval | 25 mm |
| Detecting width | 100, 225, 300, 375 mm |
| Body thickness | 13 mm |
| Power supply | 12–24VDC ±10%, ripple 10% or less |
| Current consumption | 130–155 mA or less depending on model |
| Control output | NPN/PNP selectable by switch |
| Operation mode | Light-ON / Dark-ON selectable |
| Frequency switching | Provided, up to two sensor sets |
| Light source | 880 nm infrared LED |
| JOB indicators | Green LEDs |
| JOB indicator input | Contact or non-contact input |
| FAULT indicator | Red LED |
| JOB / FAULT indication | Continuous / flashing selectable |
| Flashing speed | FAST / SLOW selectable |
| Case material | Aluminum |
| End cap / mounting foot | Glass-fiber-reinforced PBT |
| Lens material | Polycarbonate |
| Switch cover material | Polyester elastomer |
| Ambient light | 10,000 lx or less |
| Operating temperature | −10 to +55°C, non-freezing |
| Ambient humidity | 35–85% RH, non-condensing |
| Protective structure | IP62 |
Specification notes
Q1: What is the TAKEX SSP-T200 Series?
A: The SSP-T200 Series consists of through-beam bin-picking sensors designed for parts-picking confirmation and picking-error prevention.
Q2: What models are available?
A: The current lineup includes SSP-T205, T210, T213, T216 and corresponding -PJ M12 connector-pigtail versions, for a total of eight models.
Q3: What is the detecting distance?
A: All SSP-T200 models provide a detecting distance of 2 m.
Q4: What is the beam interval?
A: All models use a 25 mm beam interval and detect opaque objects Φ35 mm or larger.
Q5: What is the difference between SSP-T205, T210, T213, and T216?
A: They differ mainly in beam count and detecting width: 5/100 mm, 10/225 mm, 13/300 mm, and 16/375 mm.
Q6: Are separate NPN and PNP models required?
A: No. NPN or PNP control output can be selected using the sensor's internal switch.
Q7: Can Light-ON and Dark-ON operation be selected?
A: Yes. Light-ON or Dark-ON operation is switch-selectable to match the required control logic.
Q8: What are the JOB and FAULT indicators used for?
A: Green JOB indicators show the correct picking location, while the red FAULT indicator warns the operator of an incorrect picking action.
Q9: Does the SSP-T200 require a synchronization line?
A: No. The series uses asynchronous operation and therefore requires no synchronization line between the transmitter and receiver.
Q10: What applications are suitable for the SSP-T200 Series?
A: It is suited to automotive parts, assembly lines, parts racks, logistics picking, and pick-to-light systems for confirming correct parts removal and reducing picking errors.