Standard Vacuum Ejector
Common specifications
| Item | Spec. |
|---|---|
| Fluid | Non-lubricated air / non-corrosive gas |
| Ambient temperature | 0 to 60°C (no freezing) |
| Operating pressure range | 0.1～0.6 MPa |
Performance (by model)
| Model | Nozzle (mm) | Rated pressure (MPa) | Max. vacuum pressure (kPa) | Suction flow (L/min ANR) | Air consumption (L/min ANR) |
|---|---|---|---|---|---|
| MCV-10HS | 1.0 | 0.45 | -87 | 24 | 46 |
| MCV-10LS | 1.0 | 0.45 | -56 | 38 | 46 |
| MCV-10HR | 1.0 | 0.35 | -87 | 22 | 46 |
| MCV-13HS | 1.3 | 0.45 | -90 | 53 | 78 |
| MCV-13LS | 1.3 | 0.45 | -58 | 73 | 78 |
| MCV-13HR | 1.3 | 0.35 | -88.5 | 43 | 85 |
| MCV-15HS | 1.5 | 0.45 | -87 | 56 | 95 |
| MCV-15HR | 1.5 | 0.35 | -87 | 49 | 105 |
Weight (body only, without switch)
| Port type | MCV-10 | MCV-13 | MCV-15 |
|---|---|---|---|
| 66 / 88 | 56 g | 66 g | 67 g |
| RP | 51 g | 62 g | 62 g |
Q1: What is the MCV Series?
A: A standard vacuum ejector with a lightweight resin body and a built-in silencer for automation vacuum systems.
Q2: What improvements does MCV offer?
A: Improved press-fitting push-in connector mounting, plus a more compact and lightweight design.
Q3: What nozzle options are available and how do I choose?
A: 1.0/1.3/1.5 mm with HS/LS/HR variants; select based on leakage and required suction flow.
Q4: Should I select the "with switch" type?
A: Choose it if you need vacuum status signaling; the catalog notes the switch cannot be mounted afterwards.
Q5: How do I choose ports/tube sizes?
A: 66 for ø 6, 88 for ø 8, or RP for Rp1/4 ports.
Q6: What applications is it suitable for?
A: Space-limited fixtures, pick-and-place stations, robot EOAT, and general automation vacuum handling.
Q7: What maintenance parts are available?
A: Switch unit, reed switch, and silencer element are available as service parts.
Q8: Do you offer customization (threads/marking/special specs)?
A: No, customization is not available.
