CONVUM VFL Vacuum In-line Filter

• Slim inline design: straight-through layout for space-limited vacuum piping.
• Clear housing for quick inspection: check element contamination without disassembly.
• Tool-free element replacement: replace the element without removing piping or using tools.
• Push-in fittings for fast tubing: quicker tube installation/removal and easier maintenance.
• For vacuum lines only: use on vacuum lines; recommended on the line for dusty environments.

Q1: What is the VFL vacuum in-line filter used for?
A: It filters dust/particles in vacuum lines to help protect vacuum-side components and improve system stability.

Q2: When should I add a vacuum line filter?
A: Add it when dust/particles may enter the line, when vacuum-side components need protection, or when you want to reduce clogging and maintenance risk.

Q3: What is the benefit of a clear housing?
A: You can visually check contamination and decide service timing without opening the unit.

Q4: Do I need tools to replace the element?
A: No. The element is designed for tool-free replacement without removing the piping.

Q5: Can I use the VFL on positive pressure (compressed air) lines?
A: No. It is designated for vacuum lines only—do not connect it to compressed air lines.

Q6: Does installation direction matter?
A: Yes. Install according to the body markings for PAD side / CONVUM side (or the arrow direction).

Q7: Can I clean parts with organic solvents?
A: Not recommended. The manual warns against organic solvents (e.g., thinner), which may cause deterioration or cracks.

Q8: How do I choose between VFL-44/66/88/1010?
A: Select by tube O.D.: 4/6/8/10 mm correspond to 44/66/88/1010, then match your nozzle size requirements.