FAQ
Q1: What is the TAKEX AS Series?
A: The AS Series consists of U-shaped embedded amplifier photo sensors with the transmitter and receiver integrated into one fixed through-beam housing.
Q2: Why does the AS Series require no optical-axis alignment?
A: The transmitter and receiver are fixed on opposite sides of the U-shaped housing, so separate alignment is unnecessary.
Q3: What sensing gaps are available?
A: The AS Series offers fixed sensing gaps of 19 mm, 25 mm, and 30 mm for the AS-U20, AS-U25, and AS-U30 groups respectively.
Q4: Are both NPN and PNP outputs available?
A: Yes. The lineup includes both NPN and PNP output models.
Q5: Are Light-ON and Dark-ON models available?
A: Yes. Standard models use Light-ON, D models use Dark-ON, and AS-U30MA / AS-U30MPNA allow Light-ON / Dark-ON selection.
Q6: Do all AS Series models use the same light source?
A: No. AS-U20 and AS-U25 models use red LEDs, while AS-U30 models use infrared LEDs.
Q7: What is the protection rating of the AS Series?
A: All models have an IP67 protective structure.
Q8: Can the AS Series be used in automated warehouses?
A: Yes. The series is suitable for checking travel positions and addresses of stacker cranes in automated warehouses.
Q9: Can AS-U25 detect broken drill bits?
A: Yes. AS-U25 can be used to check drill-bit breakage at each machining stroke.
Q10: How do I select an AS Series model?
A: First select the required 19, 25, or 30 mm fixed sensing gap, then choose NPN or PNP output and the required Light-ON or Dark-ON operation.