Medium Multifunction Vacuum Ejector
| Item | Unit | 10S | 13S | 15S | 10L | 13L | 15L | 10R | 13R | 15R | 07X | 10X | 15X | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Working fluid | Non-lubricated compressed air | |||||||||||||
| Ambient temperature range | ºC | 0 to 50 (No freezing) | ||||||||||||
| Operating pressure range | MPa | 0.2 ~ 0.6 | ||||||||||||
| Air supply status | Normally closed (B), Normally open (A), Self-holding (W) | |||||||||||||
| Rated pressure | MPa | 0.5 | 0.5 | 0.25 | 0.35 | 0.5 | ||||||||
| Maximum vacuum pressure | kPa | -90 | -89 | -91 | -65 | -57 | -63 | -86 | -88 | -90 | -90 | |||
| Suction flow (individual exhaust) | L/min (ANR) | 23 (25) | 38 (42) | 57 (60) | 43 (45) | 66 (78) | 74 (90) | 20 (21) | 30 (33) | 50 (54) | 37 (48) | 48 (56) | 65 (88) | |
| Vacuum release flow rate | L/min (ANR) | 200 (when check valve is installed) | ||||||||||||
| Air consumption | L/min (ANR) | 48 | 74 | 100 | 48 | 74 | 100 | 47 | 70 | 100 | 22 | 48 | 100 | |
| Weight | Single unit (full type) | g | 255 | |||||||||||
| Manifold (1 unit / full type) | 268 | |||||||||||||
Q1: What is the SC3 Series?
A: The SC3 Series is a medium multifunction vacuum ejector with flexible sensor and filter combinations.
Q2: Why is SC3 suitable for flexible system configuration?
A: Because the series allows free selection of with or without sensor and filter options, and can be configured as a single unit or manifold unit.
Q3: What is the function of the self-holding type?
A: With the self-holding solenoid valve, vacuum can be kept during blackout or emergency stop conditions.
Q4: How can SC3 reduce air consumption?
A: When used with the MPS-10 energy-saving sensor, air consumption can be reduced by more than 50%.
Q5: Why can SC3 release workpieces quickly?
A: The series is designed for quick and reliable workpiece release.
Q6: What does operation from 0.25 MPa mean?
A: It means some types can operate from a minimum supply pressure of 0.25 MPa, depending on the selected nozzle type.
Q7: What is the difference between S, L, R, and X types?
A: They mainly differ in nozzle size, rated pressure, maximum vacuum pressure, suction flow, and air consumption.
Q8: What should be noted for manifold type and concentrated exhaust?
A: When concentrated exhaust is selected for the manifold type, a check valve must also be selected.
