Digital Pressure Sensor
| Item | Unit | MPS-V23 | MPS-P23 | MPS-R23 | |
|---|---|---|---|---|---|
| Applicable fluid | Air (vacuum), non-corrosive gas | ||||
| Sensing element | Silicon diaphragm | ||||
| Set pressure range | -101.0 ~ 0 kPa | -0.1 ~ 1 MPa | -101 ~ 500 kPa | ||
| Proof pressure | MPa | 0.3 | 1.5 | 0.8 | |
| Ambient temperature range | ºC | 0 ~ 50 (No freezing) | |||
| Ambient humidity range | %RH | 35 ~ 85 (no condensation) | |||
| Port size | R1/8 (male), NPT1/8 (male), G1/8 (male) | ||||
| Power supply voltage | V | DC12 ~ 24 ± 10%, ripple (Vp-p) less than 10% | |||
| Current consumption | mA | Max. 55 | |||
| Weight | g | 135 (including cable) | |||
Q1: What is the MPS-23 digital pressure sensor?
A: MPS-23 is CONVUM's digital pressure sensor for monitoring vacuum, positive pressure, or compound pressure in equipment that needs pressure monitoring and signal output.
Q2: What pressure types are available in the MPS-23 Series?
A: The MPS-23 Series is available in vacuum, positive pressure, and compound pressure types, so the right version can be selected based on the application.
Q3: How is the MPS-23 different from a standard pressure sensor?
A: MPS-23 uses a digital display that is easy to read, has simple button-based setup, and comes standard with both switch output and analog output for control and monitoring.
Q4: What does dual output mean on the MPS-23?
A: Dual output means it provides both a switch output and a 1–5 V analog output, so it can support equipment control and signal monitoring at the same time.
Q5: Is the MPS-23 easy to set up?
A: Yes. The MPS-23 can be set through the MODE, UP, and DOWN buttons, making on-site adjustment easier and more intuitive.
Q6: Which older models can the MPS-23 replace?
A: The MPS-23 can be used as a replacement for the discontinued MVS-060, MVS-070, and MPS-2 Series models, making it suitable for equipment updates and maintenance replacement.
Q7: What applications is the MPS-23 suitable for?
A: It is suitable for vacuum pressure monitoring, vacuum confirmation, leak checking, fixture pressure management, and automation equipment such as packaging and labeling systems.
Q8: What should be checked before selecting the MPS-23?
A: It is recommended to confirm the pressure type to be measured, the required pressure range, the port thread type, and whether the equipment needs switch output, analog output, or both.
