Name: Digital Pressure Sensor with Solenoid Valve Control
Brand: CONVUM Ltd.
SKU: CONVUM_MPS-10

Products

請選擇分類

CONVUM_MPS-10

Digital Pressure Sensor with Solenoid Valve Control

Features

Energy-saving control: Automatically controls vacuum and blow-off solenoid valves on CONVUM according to the pressure setting, significantly reducing air consumption.
Wire-saving design: Vacuum and blow-off control can be handled by a single signal. Only one 4-core cable is needed between the unit and the PLC, simplifying wiring and reducing controller load.
Compact and lightweight: Reduced from 61×25×16mm to 50×20×9.9mm; weight decreased from 20g to 10g—approx. 50% smaller than the previous model (MVS-201).
Standard analog output （DC1～5V） and switch output included.
Easy operation: Pressure settings can be adjusted using UP and DOWN keys. Rubber button design improves tactile feedback and usability.
Directly compatible with CONVUM systems.

Specification

Item		Unit	MPS-10
Applicable Fluid			Air, non-corrosive gas, non-flammable gas
Sensing Element			Sillicon diaphragm
Set Pressure Range		kPa	-101 ~ 500
Proof Pressure		MPa	0.8
Ambient Temperature Range		ºC	0 ~ 50 (No freezing)
Ambient Humidity Range		%RH	35 ~ 85 (no condensation)
Power Supply Voltage		V	DC 24 ± 10%, ripple (Vp-p) 5% or less
Max. Power Consumption		mA	50 (excluding solenoid valve driving current)
Response Time		ms	1.5 or less
Net Weight	Without cable	g	10
Net Weight	With cable	g	32

File Downloads

File Name

File Type

Download

Digital Pressure Sensor with Solenoid Valve Control MPS-10 Series_E

PDF

Instruction Manual MPS-10_E

PDF