CONVUM CVA-V Vacuum Switch | Mechanical, CVA2 Use, Stable Control

• CVA2-dedicated, direct body mounting: Purpose-built for CONVUM CVA2 vacuum ejectors; drop-in fit for fast, accurate installation.
• Mechanical, no external power: Pure mechanical actuation for vacuum-reached / release detection without any power supply.
• Stable switching: Set range −33.3 to −73.2 kPa, fixed hysteresis 4 to 13.3 kPa for clear ON/OFF transitions.
• Rugged and simple: Minimal parts, easy maintenance, long service life.
• Compact & light, tidy wiring: Approx. 135 g body with 100 mm lead for flexible mounting.
• Applications: CVA2 pick-and-place reach/leak detection, fixture interlocks, basic ON/OFF control in general vacuum systems.

Q1: Does it require external power?
A: No. CVA-V is a mechanical vacuum pressure switch that switches purely by mechanism.

Q2: What does it pair with?
A: It is dedicated to CONVUM CVA2 vacuum ejectors. Direct mounting ensures the fastest and most stable integration.

Q3: What are the set range and hysteresis?
A: Set range −33.3 to −73.2 kPa, fixed hysteresis 4 to 13.3 kPa, providing clear ON/OFF transitions.

Q4: Can I use it in other vacuum systems?
A: It may be used in compatible low-vacuum applications, but best repeatability and stability are achieved with CVA2 systems.

Q5: Any constraints on mounting orientation or position?
A: The standard method is direct mounting on the designated CVA2 position. For unusual orientations or offsets, verify fixture clearance and run a small on-site test.

Q6: What is the output contact type (NO/NC)? Can it be changed?
A: It is a mechanical switching output. Refer to the datasheet/markings on the unit for the exact contact specification and wiring method.

Q7: How do I fine-tune the setpoint in the field?
A: Follow the on-body indication or datasheet to adjust the setting screw (if provided). Use a reference vacuum source and approach the target slowly while monitoring the switch point.

Q8: How to ensure repeatability and long-term stability?
A: Include the switch point in periodic inspections, check for leaks and fastener loosening, and verify switching with a known reference vacuum.

Q9: Will oil mist or dust affect operation?
A: Keep within allowable environmental conditions. Use clean vacuum and proper filtration, and maintain the system regularly for stable switching.

Q10: What about body and cable specs? Can I extend the cable?
A: The body is approx. 135 g with a 100 mm lead. If extension is required, use proper-rated extension cables and terminals, and secure routing to avoid strain or signal issues.