CONVUM VFL-M5 Miniature Vacuum In-Line Filter

• Clear body for quick inspection: Visually check the filter element condition at a glance.
• Ultra-compact design: Ideal for space-limited vacuum piping and small devices.
• Vacuum equipment protection: Recommended for vacuum circuits, especially in dusty environments.
• Vacuum line only: Use on vacuum circuits only (not for positive pressure lines).
• Precaution: Resin body—do not exceed 0.24 N·m tightening torque and avoid excessive lateral load.

Q1: What is the VFL-M5 vacuum inline filter used for?
A: It filters dust/particles in vacuum lines to help protect vacuum-side components and improve stability.

Q2: When should I add a vacuum line filter?
A: Add one when dust is present, contaminants may enter the line, or when vacuum-side components need protection.

Q3: Why use a clear-body vacuum filter?
A: The clear body enables quick visual inspection, making maintenance timing easier and reducing downtime.

Q4: Can I use the VFL-M5 on positive pressure lines?
A: No. The VFL-M5 is for vacuum lines only and should be used on vacuum circuits.

Q5: What is the filtration rating of the VFL-M5?
A: The filtration rating is 37 µm, suitable for low-flow vacuum piping protection.

Q6: Any installation precautions?
A: Resin body—do not exceed 0.24 N·m tightening torque and avoid excessive lateral load.

Q7: How often should I service the filter?
A: It depends on dust level and cycle rate. Inspect if suction drops or response slows, then clean/replace.

Q8: What applications is the VFL-M5 best for?
A: Tight spaces, small devices, and low-flow vacuum lines where compact inline protection is needed.