Ultra-Thin Single-Action Cylinder
| Item | TS-12-3-S1 | TS-20-3-S1 | TS-30-5-S1 | TS-40-5-S1 |
|---|---|---|---|---|
| Product category | Thin diaphragm type cylinder | |||
| Operating style | Single action | |||
| Cylinder diameter | 12 mm | 20 mm | 30 mm | 40 mm |
| Stroke | 3 mm | 3 mm | 5 mm | 5 mm |
| Effective pressure area | 80 mm² | 250 mm² | 570 mm² | 1,050 mm² |
| Spring reaction force | 0.39 to 0.59N | 0.98 to 1.76N | 1.77 to 3.77N | 4.41 to 6.37N |
| Rod-spin stopper | Attached | Attached | None | None |
| Working fluid | Clean compressed air | |||
| Working pressure range | 0.07 to 0.5 MPa | |||
| Working temperature | 0 to 60 ℃, no freezing | |||
| Pipe port | M5×0.8 internal thread | |||
| Weight | 35 g | 65 g | 110 g | 160 g |
Q1: What is the FUJIKURA TS Series?
A: The TS Series is an ultra-thin single-action diaphragm cylinder designed for limited installation spaces.
Q2: Is the TS Series classified as a BF cylinder?
A: No. FUJIKURA classifies the TS Series as a thin diaphragm type cylinder, although its drive section uses a BF diaphragm.
Q3: What standard models are available?
A: Standard models are TS-12-3-S1, TS-20-3-S1, TS-30-5-S1, and TS-40-5-S1.
Q4: What bore sizes are available?
A: Bore sizes of 12, 20, 30, and 40mm are available.
Q5: What strokes are available?
A: The 12 and 20mm bore models have a 3mm stroke. The 30 and 40mm bore models have a 5mm stroke.
Q6: What is the working pressure range?
A: TS-12-3-S1 operates from 0.07 to 0.5MPa. The other three models operate from 0.02 to 0.5MPa.
Q7: Do all TS models include a rod-spin stopper?
A: TS-12-3-S1 and TS-20-3-S1 include a rod-spin stopper. TS-30-5-S1 and TS-40-5-S1 do not.
Q8: What working fluid is used?
A: The TS Series uses clean compressed air.
Q9: What operating conditions is the TS Series suitable for?
A: It is suitable for applications where air leakage is not allowed or sensitive response to minute pressure variations is required.
Q10: What applications is the TS Series suitable for?
A: It is suitable for high-sensitivity actuators, pressure rollers, dancer rollers, clean-factory equipment, polishing equipment, constant-output precision actuators, and emergency actuators.
