GENTLE F-04D DC Fan Ionizer｜Six-Needle Static Eliminator

• Six-Needle High-Efficiency Neutralization: DC corona discharge rapidly neutralizes static within 50–1500 mm; about 1.2 s at 200 mm under typical conditions.
• No-Airflow / Breeze Modes: Switch between silent no-airflow and gentle breeze to avoid disturbing processes or measurements.
• Ultra-Low Ozone: <0.005 ppm, odor-free and safe for operator comfort.
• Flexible Mounting: Supports wall, clamp, and rod mounts for easy integration at tools and workstations.
• Taiwan-Made Durability: TAIBS ion-balance control with approx. 25,000 hr needle life and 50,000 hr overall service life for stable long-term operation.
• Applications: Cleanroom benches, SMT/optical lines, precision electronics assembly, CNC load/unload points, metrology stations and jigs, ESD-sensitive zones requiring local static suppression.

Q1: How fast does the F-04D neutralize static?
A: Around 1.2 s at 200 mm. Actual time varies with distance, ambient airflow, and surface charge.

Q2: Does it generate noticeable ozone or odor?
A: Ozone is <0.005 ppm, which is safe and effectively odor-free; maintain good room ventilation for best comfort.

Q3: When should I use No-Airflow vs. Breeze mode?
A: Use No-Airflow for measurements or particle-sensitive steps; use Breeze to widen coverage or improve ion dispersion—tune per station needs.

Q4: Recommended mounting position and working distance?
A: Aim directly at the target surface within the 50–1500 mm effective range; avoid turbulent zones or blowing directly at dust sources.

Q5: How should I maintain the unit?
A: Clean discharge needles and the outlet path on a schedule based on dust/oil-mist levels. Use lint-free wipes and mild cleaners to avoid electrode damage.

Q6: When should needles be replaced?
A: Typical needle life is about 25,000 hr. If decay time increases or ion balance drifts, inspect and replace as needed.

Q7: Is grounding required?
A: Yes. Proper grounding per the manual is essential for ion balance and safety; poor grounding degrades performance.

Q8: Any precautions near optics or uncured materials?
A: Prefer No-Airflow mode and keep an appropriate standoff to minimize airflow disturbance or particle entrainment; trial on a small area first.

Q9: Is it suitable for long-term cleanroom use?
A: Yes—set up routine cleaning and checks (needle contamination, ion balance, residual voltage) to maintain performance.

Q10: What should I verify after relocating the unit?
A: Re-align angle and distance, confirm grounding/power/mode settings, and validate decay time and residual voltage with a test coupon.