GENTLE TSM Mini Female M5 Coupler｜Compact Precision Threaded

• Ultra-Compact for Tight Layouts: ~40% smaller volume and ~20% slimmer OD for dense routing inside control panels, behind panels, jigs/fixtures, test gear, and cobot EOAT.
• Direct M5 Female Connection: Standard M5 female thread mates to common pneumatic components/adapters—fewer interfaces and leak paths.
• Hex-Base Wrenching: External hex base for precise positioning and secure fastening with open-end/box/socket wrenches—great in narrow slots.
• Smooth Push-In, Quick Service: Push fully to the stop to lock; press the release ring to disconnect—fast changeovers.
• Durable, Airtight Build: Nickel-plated brass body with metal collet and O-ring sealing for corrosion and vibration resistance.
• Flexible Sealing Practice: Supplied without pre-sealant; use site-preferred liquid sealant or PTFE tape on the mating male thread.
• Applications: Precision modules, close-coupled micro valves, short runs in control cabinets, EOAT/fixtures micro lines, test instruments, and high-density stages.

Q1: How does TSM differ from TS and TSH?
A: TSM is a female M5 mini coupler for direct mating; TS is male-threaded; TSH uses an internal-hex low-profile form for near-flush, dense layouts.

Q2: Are the threads pre-sealed? How should I seal them?
A: No. Apply liquid thread sealant or PTFE tape to the mating male thread per site practice, then pressure-hold and leak-check.

Q3: Which tubing sizes/materials are supported?
A: PU and nylon (PA) in 4 mm and 6 mm OD.

Q4: Recommended installation steps?
A: (1) Wrench the female side via the hex base → (2) Cut square, deburr, clean/dry the tube → (3) Push fully to the stop → (4) Pull-check → (5) Leak-test.

Q5: Can it be reconnected? Is the O-ring replaceable?
A: Reconnection is fine with intact parts. The O-ring is integral and non-replaceable; if leakage or grip loss occurs, replace the entire fitting.

Q6: Any surface prep before assembly?
A: Keep mating threads clean and dry—remove dust, cutting oil, and residues to maximize sealant/PTFE effectiveness.

Q7: What operating environment is intended?
A: General industrial compressed-air service; validate pressure/temperature/vibration against your system and tubing specs.