GENTLE TT Mini T-Type Quick Coupler｜Compact Three-Way Manifold

• Ultra-Compact Footprint: About 40% smaller and 20% slimmer for panel interiors, behind-panel areas, jigs/fixtures, and space-constrained layouts.
• Three-Way Manifold Split: Single inlet with dual outlets to shorten tubing runs and reduce pressure loss.
• Push-to-Connect Service: Smooth collet action—push fully to the stop to lock; press the collet to release for fast maintenance.
• Hex Wrench Access: Hex above the threaded port allows confident tightening and accurate orientation even in tight spaces.
• Sealed & Durable: O-ring sealing with metal collet for vibration resistance; RC threads are pre-coated for tape-free installation.
• Applications: Local distribution inside machines, near-point branching, robot end-of-arm tooling splits, and compact manifolded systems.

Q1: How does TT differ from UT series?
A: TT uses two push-in ports plus one threaded port—ideal when a threaded interface (valve/body) is required. UT has three push-in ports only for thread-free splits.

Q2: Typical applications?
A: Single-inlet dual-outlet distribution in compact manifolds, machine interiors, and robot end-of-arm tooling where shortening tubing runs reduces pressure loss.

Q3: Supported tubing?
A: 4 mm / 6 mm OD nylon (PA) and polyurethane (PU). For best sealing, square-cut the tube with a PU tube cutter and push fully to the stop.

Q4: Do RC threaded models need PTFE tape?
A: No. RC threads are pre-coated with sealant for direct installation. If the coating wears after multiple reassemblies, re-seal as required.