GENTLE UY Mini Y-Type Quick Coupler｜Compact Dual Outlet Splitter

• Compact Profile, Full Range of Sizes (4/6 mm): ~40% smaller and ~20% slimmer for dense layouts in control panels, behind panels, rail-side slots, fixtures, and robot wrists.
• Equal-Diameter Y Split: Three equal ports with symmetric outlets for balanced distribution and lower pressure drop when expanding one line into two.
• Push-to-Connect, Easy Service: Insert fully to the stop to lock; press the release ring to disconnect for fast, tool-free maintenance.
• Threadless Tube-to-Tube: No threading, no PTFE tape—flexible positioning and quick reconfiguration for modular setups.
• Airtight & Taiwan-Made: O-ring + metal collet sealing rated 0–0.9 MPa, 5–60 °C; available in black or grey-white (-GW).
• Module-Friendly Layout: Intuitive equal-Y path simplifies modular routing and quick expansions.
• Applications: General pneumatic splitting on automation lines, in-machine near-point distribution, EOAT dual feeds, test benches, and behind-panel branching.

Q1: How does UY differ from UT and UTD?
A: UY is an equal-diameter Y with two symmetric outlets; UT is an equal-diameter T; UTD is a reducing T (e.g., 6→4 mm) for size conversion.

Q2: Where is UY most suitable and what media?
A: Tight industrial layouts using clean, dry compressed air within 0–0.9 MPa and 5–60 °C—e.g., line splitting, in-machine distribution, and EOAT dual feeds.

Q3: Is seal tape required?
A: No. UY is a threadless tube-to-tube design—simply push to connect.

Q4: Any flow-direction constraint?
A: Non-directional. Assign inlet/outlets freely based on your layout.

Q5: Installation and service tips?
A: Cut square, deburr, clean/dry → push fully to the stop → pull-check → pressure-hold/leak-test. For removal, depressurize, then press the release ring and pull straight.

Q6: Is it reusable?
A: Yes—re-cut a short section to keep the tube end clean and square before reinsertion to preserve sealing and grip.