GENTLE UYD Mini Y-Type Reducer Coupler｜6→4 mm Adapter

• Compact Profile, Full Range of Sizes (6→4 mm): ~40% smaller and ~20% slimmer for dense layouts in control panels, behind panels, rail-side slots, fixtures, and robot wrists.
• 6→4 mm Reducing Y Split: 6 mm main leg with two symmetric 4 mm outlets for balanced dual feeds, shorter branches and lower ΔP.
• Push-to-Connect, Quick Service: Insert fully to the stop to lock; press the release ring to disconnect—tool-free and fast.
• Threadless Tube-to-Tube: No threading, no PTFE tape—easy repositioning and reuse in modular setups.
• Airtight & Taiwan-Made: O-ring + metal collet sealing rated 0–0.9 MPa, 5–60 °C; available in black or grey-white (-GW).
• Install-Friendly Practice: Cut square, deburr, clean/dry the tube to preserve sealing and grip.
• Applications: Near-source 6→4 mm dual branches, in-machine feeds to small actuators, robot-end dual outlets, and compact behind-panel/test-bench reducing distribution.

Q1: Where is this reducer Y fitting typically used?
A: For 6→4 mm step-down branching in compact pneumatic layouts—near small actuators, in-machine distribution, and robot-end dual outlets.

Q2: Do I need PTFE tape?
A: No. It's a threadless, tube-to-tube push-in design—no tape required.

Q3: Is it reusable?
A: Yes, provided the O-ring and collet remain intact. Re-cut scratched or ovalized tube ends before reinsertion.

Q4: What is the operating range?
A: 0–0.9 MPa, 5–60 °C with clean, filtered compressed air.

Q5: Is it made in Taiwan?
A: Yes—GENTLE UYD is 100% Taiwan-made.

Q6: How do I select the model?
A: This series is UYD6-4M (6→4 mm), available in black or grey-white (-GW).