GENTLE ULD Mini Reducer Elbow Coupler｜6→4 mm Micro L-Type Union

• 90° Elbow with 6→4 mm Step-Down: L-shaped corner turn and size transition in one fitting—ideal for tight spots.
• Ultra-Compact Body: About 40% smaller and 20% slimmer for precision equipment and dense layouts.
• Dual Push-In, Easy Service: Tube-to-tube on both ends—push fully to the stop to lock; press the release ring to disconnect.
• Airtight & Vibration-Resistant: O-ring sealing with metal collet and precise tolerances for reliable service at 0–0.9 MPa, 5–60 °C.
• Threadless, Tape-Free: No threads or sealant—clean installs and flexible repositioning.
• Made in Taiwan, Dual Colors: Black or grey-white (-GW) for clear circuit identification.
• Applications: 90° turns with 6→4 mm step-down in control panels, behind-panel corners, rail-slot areas, robot end-effectors, and module-to-module transitions.

Q1: Where is the ULD (MINI) best applied?
A: In compact 90° elbow routes that also require a 6→4 mm step-down—e.g., control panels, behind-panel corners, tight module interfaces, and robot end-effectors.

Q2: Do I need PTFE tape or thread sealant?
A: No. ULD is a threadless tube-to-tube push-in design; just insert fully to seal.

Q3: Can it be reused? Any handling tips?
A: Yes. Depressurize first, then press the release ring to remove. If the tube end is scratched or ovalized, re-cut it square before reinsertion.

Q4: What is the operating range and recommended media?
A: 0–0.9 MPa and 5–60 °C with clean, filtered, dehumidified compressed air for best sealing life.

Q5: Is it made in Taiwan?
A: Yes—the ULD (MINI) series is 100% Taiwan-made for consistent quality.

Q6: How do I select the model?
A: Choose ULD6-4M (6→4 mm); finishes available in black or grey-white (-GW).