GENTLE UTF TAC Nut-Clamp Fitting｜Universal T-Type 3-Way Connector

• Dual Side Ports (M5 Female): Two side M5 female ports for branching, adapting, or measurement; compared with UEF's single port, UTF supports simultaneous dual take-offs.
• Two Rubber Washers, Face-Sealed: One under the slotted plug and one under the M5 mounting stud for airtight, vibration-resistant sealing.
• Slotted Plug: Quick open/close for maintenance venting, temporary gauge hookup, or blow-off tests.
• M5 Stud Mounting: Panel/bulkhead face-seal installation shortens leak paths and enables easy torque control and fast service.
• Compact, Durable Body: Nickel-plated brass resists corrosion and wear; ideal for panel corners, module edges, and cramped locations.
• Applications: Dual-purpose test/bleed tee on valve islands or panels (e.g., one outlet to air, the other to a gauge), automation branching from a single supply to cylinders/fixtures, fixture/test stations with one port for a gauge and the other for supply/vent, robot EOAT with two micro take-offs to shorten tubing and reduce interference.

Q1: How many ports does UTF have?
A: Two M5 female side ports (T-type 3-way). The top is a slotted plug (with rubber washer); the bottom is an M5 mounting stud (with rubber washer).

Q2: Where are the rubber washers?
A: One beneath the plug and one beneath the mounting stud—both are face-seal locations.

Q3: Is it reusable?
A: Yes. Inspect the rubber washers and threads during service; replace worn parts as needed.

Q4: How is UTF different from UEF?
A: UTF is a dual-port tee for branching/adapting; UEF is a single-port type for a dedicated point.

Q5: Do I need PTFE tape?
A: Typically no—the two face-seals provide leak-tight performance. If side-port accessories are added, follow the accessory's sealing method and site practice.

Q6: Any installation notes?
A: Both the plug and stud are face-seal interfaces. Tighten to seat and seal—avoid over-torquing that could damage the rubber washer. Use a male M5 push-in fitting or compatible adapter to connect tubing to a side port.