GENTLE PF TAC Nut-Clamp Fitting｜M5 Hex Metal Screw Plug Stopper

• Lightweight Body: Only 1.5 g, ideal for compact/precision equipment.
• Face-Seal, Leak-Tight: Supplied rubber washer sits above the thread at the face-seal land—wrench-tighten for reliable, anti-vibration sealing.
• Hex Head for Easy Install: M5×0.8 male, hex head enables fast tightening/removal in confined spaces.
• Durable Build: Nickel-plated brass for corrosion/wear resistance; supports repeated servicing.
• Made in Taiwan: Stable dimensions for easier stocking and standardization.
• Applications: Port capping on cylinders/sensors/valves and service plugs on precision pneumatic lines.

Q1: What's the difference between PF and PF-EXF?
A: PF is a blind plug (no hole); PF-EXF includes a ø1.0 mm through-hole for micro-venting or pressure checks.

Q2: Do I need PTFE tape or sealant?
A: Normally no—the face-seal rubber washer provides airtight sealing. Follow site practice only for special cases.

Q3: Is PF reusable?
A: Yes. Inspect the rubber washer and threads during service; replace the washer if worn or deformed.

Q4: What pressure/media is recommended?
A: Use with clean, dry compressed air in general pneumatic ranges (commonly 0–0.9 MPa). For higher pressure, vacuum, or special media, validate compatibility and proof-pressure first.

Q5: Where is PF typically used?
A: Capping unused ports on cylinders/sensors/valves and as a removable service plug on compact pneumatic modules.