13 mm Slim Dual-Mode Bin-Picking Sensors
| Item | Spec. |
|---|---|
| Product type | Switchable retroreflective/diffuse reflective bin-picking sensor |
| Current models | SSP-S204R SSP-S208R SSP-S204R-PJ SSP-S208R-PJ |
| Detection methods | Retroreflective / diffuse reflective, selectable |
| Retroreflective range | Up to 2 m |
| Reflector setting range | 700–2,000 mm |
| Diffuse reflective range | 700 mm with 300 × 300 mm white drawing paper; 400 mm with A4 18% reflectivity gray card |
| Detecting object | Φ80 mm or larger |
| Number of optical axes | 4, 8 |
| Detecting width | 100, 225 mm |
| Body thickness | 13 mm |
| Power supply | 12–24VDC ±10%, ripple 10% or less |
| Control output | NPN/PNP selectable by internal switch |
| Operation mode | Normally open / normally closed selectable |
| Response time | 120 ms or less |
| Light source | 640 nm red LED |
| JOB indicators | Two large green LEDs |
| JOB indicator input | Contact or non-contact input |
| JOB input operating voltage | NPN: 2 V or less; PNP: 8 V or more |
| FAULT indicator | Red LED, flashing |
| Operation indicator | Orange LED |
| Initial sensitivity indicator | Green / orange LED |
| Case material | Aluminum |
| End cap / mounting foot | Glass-fiber-reinforced PBT |
| Lens material | Polycarbonate |
| Ambient light | 10,000 lx or less |
| Operating temperature | −10 to +55°C, non-freezing |
| Ambient humidity | 35–85% RH, non-condensing |
| Protective structure | IP62 |
Specification notes
Q1: What is the TAKEX SSP-S200 Series?
A: The SSP-S200 Series consists of slim bin-picking sensors that can switch between retroreflective and diffuse reflective sensing.
Q2: What models are available?
A: The current lineup includes SSP-S204R, SSP-S208R, SSP-S204R-PJ, and SSP-S208R-PJ.
Q3: What is the retroreflective sensing range?
A: Retroreflective operation reaches up to 2 m, with the series lineup specifying a reflector setting range of 700–2,000 mm.
Q4: What is the diffuse reflective sensing range?
A: The range is 700 mm with 300 × 300 mm white drawing paper and 400 mm with an A4 18% reflectivity gray card.
Q5: What is the difference between SSP-S204R and SSP-S208R?
A: SSP-S204R has four optical axes and a 100 mm detecting width, while SSP-S208R has eight axes and a 225 mm detecting width.
Q6: What does the -PJ suffix mean?
A: -PJ models use a 0.3 m pigtail with an M12 connector, while standard models have a 2 m attached cable.
Q7: Are separate NPN and PNP models required?
A: No. NPN or PNP output is selectable by an internal switch, and normally open or normally closed operation is also selectable.
Q8: What are the JOB and FAULT indicators used for?
A: The large green JOB indicators identify the correct picking location, while the red FAULT indicator flashes to warn of an incorrect picking action.
Q9: Does SSP-S200 require manual sensitivity adjustment?
A: After the sensing method is selected and power is applied, the sensor performs automatic sensitivity initialization and also supports automatic re-initialization.
Q10: What applications are suitable for the SSP-S200 Series?
A: It is suited to parts racks, assembly lines, logistics picking, and pick-to-light systems for guiding operators and confirming correct parts selection.