Non-Contact Vacuum Pads
| Item | Unit | COP-20 | COP-40 | COP-60 | COP-80 | COP-100 |
|---|---|---|---|---|---|---|
| Applicable fluid | Air (non-corrosive, non-flammable gas) | |||||
| Port size | M5 | RC1/8 | RC1/8 | RC1/4 | RC1/4 | |
| Operating pressure range | MPa | 0.15 ~ 0.5 | ||||
| Operating temperature range | ºC | 0 ~ 60 (Do not allow freezing) | ||||
| Lifting force | N | 1.3 | 5.1 | 8.5 | 24.5 | 39.2 |
| Air consumption | L/min (ANR) | 79 | 114 | 133 | 242 | 242 |
| Net weight | g | 13.5 | 59 | 102 | 171 | 230 |
Note: Lifting force and air consumption are measured under an air supply pressure of 0.5 MPa with flat, non-porous workpieces.
Q1: What is the COP non-contact vacuum pad?
A: The COP is a non-contact vacuum pad that uses high-speed discharged air to draw the workpiece close for handling without direct contact. It is suitable when the surface should be protected from marks or scratches.
Q2: How is the COP different from a standard vacuum pad?
A: The COP is designed for non-contact handling rather than direct surface contact, which helps reduce suction marks and scratches on the workpiece.
Q3: What workpieces is the COP suitable for?
A: It is suitable for workpieces with sensitive surfaces and for special workpieces that are difficult to handle with standard suction pads.
Q4: Will the COP always stay completely away from the workpiece surface?
A: Not always. If the workpiece surface is uneven, partial contact may still occur.
Q5: Why can the COP be used in a more hygienic condition?
A: Because it handles workpieces by discharged air, the inside is less likely to get dirty and can remain in a more hygienic condition even without disassembly cleaning.
Q6: What sizes are available in the COP Series?
A: The series is available in COP-20, COP-40, COP-60, COP-80, and COP-100 sizes.
Q7: What are the anti-slip damper and work holding guide used for?
A: These accessories help reduce lateral slipping and rotation and improve workpiece stability during handling.
Q8: What should be checked before selecting the COP?
A: It is recommended to confirm the workpiece size, surface condition, installation space, port size, and whether anti-slip or work holding accessories are needed.
