[Disc.] 10mm Vacuum Ejector Unit
※ Discontinuation Notice: The MC3 and MC32 series have been discontinued. Recommended replacement: SC1 Series (Compact Energy-Saving Vacuum Ejectors) for continued supply and performance upgrades.
| Item | Unit | MC32☐-05 | MC32☐-07 | MC32☐-10 | ||||
|---|---|---|---|---|---|---|---|---|
| HS | HR | HS | HR | HS | HR | |||
| Working fluid | Non-lubricated air / non-corrosive gas | |||||||
| Ambient temperature | ºC | 0 ～ 60 (no freezing) | ||||||
| Operating pressure range | MPa | 0.2 ~ 0.55 | ||||||
| Blow-off flow | L/min (ANR) | 10 | ||||||
| Solenoid valve air passage | Normally closed / Self-holding | |||||||
| Filter element filtration | µm | 250 | ||||||
| Nozzle size | mm | 0.5 | 0.7 | 1.0 | ||||
| Rated pressure | MPa | 0.5 | 0.35 | 0.5 | 0.35 | 0.5 | 0.35 | |
| Vacuum flow | L/min (ANR) | 5.5 | 4 | 11 | 9 | 20 | 15 | |
| Max. vacuum pressure | kPa | -87 | ||||||
| Air consumption | L/min (ANR) | 10 | 22.5 | 50 | ||||
| Mass without sensor | g | 57.5 | ||||||
Q1: What kind of equipment is the MC32 Series suitable for?
A: The MC32 Series is suitable for equipment that needs a compact vacuum ejector with a 10 mm body and concentrated installation layout.
Q2: Can the MC32 Series be used with a digital vacuum sensor?
A: Yes. The MC32 Series supports digital vacuum sensor mounting and selectable sensor configurations.
Q3: What exhaust options are available for MC32?
A: Exhaust can be selected as either an M5 port or a silencer.
Q4: Can MC32 be mounted on a manifold?
A: Yes. The series supports manifold mounting with up to 8 units.
Q5: What is the difference between 05, 07, and 10 types?
A: The main differences are nozzle size, vacuum flow, and air consumption. The nozzle sizes are 0.5 mm, 0.7 mm, and 1.0 mm.
Q6: What is the difference between HS and HR?
A: The main differences are nominal pressure and vacuum flow. HS is 0.5 MPa, while HR is 0.35 MPa.
Q7: Are normally closed and self-holding valve types available?
A: Yes. The MC32 Series can be selected with either a normally closed or a self-holding solenoid valve.
Q8: What should be noted when selecting the self-holding type?
A: If the self-holding valve is selected, the energy-saving function of a sensor cannot work.
