Products
請選擇分類
- All Products
- Pneumatic Series
- GENTLE Pneumatic Fittings
- GENTLE Ionizer
- CONVUM Ltd.
- FUJIKURA
- FUJI LATEX Co., Ltd.
- KOGANEI Corporation
- iB series
- Air Cylinders, Hands
- Air Valves
- Air Filters, Regulators, Pressure Gauges
- Flow Rate Sensor Switches, Plachain Ducts, Pressure Switches
- Vacuum Equipment, Pads
- Electric Actuator
- Environmental Hygiene Equipment
- Static Electricity Removal
- Fluororesin Products
- Fixed Discharge Pump
- Medium Control Equipment
- Pulse Blow Series
- NKE Corporation
- TAKEX
- Dispensing Series
Features
- Lightweight Resin Body: Reduces end-of-arm load—great for fast pick-and-place.
- Push-In Tube Connections: In-line, tool-less plumbing for rapid installation and cleaner routing.
- Direct Pad Mounting: Optional male-threaded ports let pads mount directly to the body, shortening lines and cutting pressure loss.
- Multiple Nozzle Sizes: 0.5 / 0.7 / 1.0 / 1.3 mm to cover low–mid flow; size by leakage / cup area / cycle time.
- Compact Form Factor: Suits dense layouts and modular tooling in tight spaces.
- Applications: Electronics packaging/assembly pick-and-place, labeling, sorting/loading modules, compact EOAT builds.
Specification
| Item | Unit | MCA-05 | MCA-07 | MCA-10 | MCA-13 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| HS | LS | HS | LS | HR | HS | LS | HR | HS | |||
| Working Fluid | Oil-free compressed air | ||||||||||
| Ambient Temperature | ºC | 0 ~ 60 (Do not allow freezing) | |||||||||
| Operating Pressure Range | MPa | 0.1 ~ 0.6 | |||||||||
| Nozzle Diameter | ømm | 0.5 | 0.7 | 1.0 | 1.3 | ||||||
| Rated Pressure | MPa | 0.5 | 0.5 | 0.35 | 0.5 | 0.35 | 0.5 | ||||
| Suction Flow Rate | L/min (ANR) | 5 | 9 | 11.5 | 19.5 | 10 | 25 | 37 | 21 | 35 | |
| Achievable Vacuum Pressure | kPa | -86 | -60 | -86 | -50 | -86 | -90 | -60 | -86 | -92 | |
| Air Consumption | L/min (ANR) | 13.2 | 22.6 | 24.5 | 47.5 | 48.5 | 79.5 | ||||
| Net Weight | g | 19.1 | 26.6 | ||||||||
FAQ
Q1: What sets MCA apart from standard ejectors?
A: Built-in push-in fittings and optional male-threaded pad ports—faster setup and smaller footprint.
Q2: Where does MCA fit best?
A: Stations needing quick setup in limited space: electronics assembly, packaging/labeling, sorting, loading, and modular grippers.
Q3: Is it compatible with my pads?
A: Yes. Choose the male-threaded version and match the thread spec to your pad.
Q4: How do I choose the nozzle size?
A: Match leak rate, cup size, and target cycle time—higher leakage/faster cycles → larger nozzle.
Q5: Why does lightweight matter?
A: Lower EOAT mass improves accel/decel and positioning stability.
Q6: Any installation/maintenance tips?
A: Use clean, dry, oil-free air with upstream filtration; periodically check fitting seals and filter cleanliness for stable vacuum.
File Downloads
File Name
File Type
Download
Go top