Name: U-Shaped Mark Sensor for Transparent Film
Brand: TAKEX Takenaka Engineering Co., Ltd.
SKU: TAKEX_MU10

Products

請選擇分類

TAKEX_MU10

U-Shaped Mark Sensor for Transparent Film

TAKEX MU10N is a U-shaped mark sensor for transparent and translucent film.
It features a fixed 10 mm sensing gap, 570 nm green LED, Light-ON and Dark-ON output leads, sensitivity adjustment, 3 ms response, and a 3 m attached cable.

Brand

Add to Inquiry Cart

Features
Specification
FAQ

Features

Transparent and translucent film detection: The green LED supports register-mark detection on transparent materials and translucent materials with 10–100% light transmittance.
Fixed 10 mm U-shaped design: The emitter and receiver are integrated into one housing with a fixed 10 mm sensing gap, eliminating separate optical-axis alignment.
Resistance to optical misalignment: The integrated optical structure keeps the emitter and receiver aligned and reduces the risk of misalignment caused by machine vibration.
Dual operation output leads: Light-ON and Dark-ON signals are provided through two separate output leads for selection according to the control requirement.
Sensitivity adjustment and reception indication: A sensitivity adjustment and red light-reception indicator support setup for different film transmission and register-mark conditions.

Specification

Item	Spec.
Product type	U-shaped mark sensor for transparent/translucent film
Series model	MU10N
Detection method	U-shaped through beam
Detection interval	Fixed 10 mm
Target material	Transparent or translucent film and packaging materials
Power supply	12–24VDC ±10%, ripple 10% or less
Current consumption	35 mA or less
Operation mode	Light-ON and Dark-ON, two output leads
Response time	3 ms or less
Light source	Green LED
Indicator	Red light-reception indicator
Material	Polycarbonate
Ambient light	3,000 lx or less
Operating temperature	−10 to +55°C, non-freezing
Ambient humidity	35–85% RH, non-condensing
Protective structure	IP40
Weight	Approx. 220 g

Specification notes

MU10N is intended for register-mark detection on transparent and translucent materials. Its 570 nm green LED supports transparent materials and translucent materials with 10–100% light transmittance.
Light-ON and Dark-ON are not selected by a mode switch. The two operation signals are provided through separate output leads.
Detection performance varies with mark density, material transmittance, and printing conditions. Sensitivity should be checked with the actual target material.

FAQ

Q1: What is the TAKEX MU10 Series?
A: The MU10 Series is a U-shaped through-beam mark sensor series designed for register-mark detection on transparent and translucent film. The current model is MU10N.

Q2: What is the sensing gap of MU10N?
A: The distance between the emitter and receiver is fixed at 10 mm.

Q3: Does MU10N require optical-axis adjustment?
A: No. The emitter and receiver are integrated into the same U-shaped housing, so separate alignment is unnecessary.

Q4: Can MU10N detect marks on transparent film?
A: Yes. MU10N is designed for detecting printed register marks along the edge of transparent and translucent film.

Q5: What translucent materials can MU10N detect?
A: It is suitable for translucent materials with 10–100% light transmittance, subject to mark density and actual material conditions.

Q6: What light source does MU10N use?
A: MU10N uses a 570 nm green LED.

Q7: How are Light-ON and Dark-ON signals provided?
A: Light-ON and Dark-ON signals are provided through two separate output leads.

Q8: What is the response time of MU10N?
A: The response time is 3 ms or less.

Q9: Does MU10N provide sensitivity adjustment?
A: Yes. A sensitivity adjustment and red light-reception indicator are provided for setup.

Q10: What applications are suitable for MU10N?
A: It is suited to packaging, food, and pharmaceutical equipment for register-mark detection on wrapping paper, transparent film, and translucent film.

Back to List

Go top