TAKEX SSP-M32R Slim Polarized Retroreflective Bin-Picking Sensor

EN
Close
Search
Banner Banner
Products
請選擇分類
TAKEX SSP-M32R 12 mm slim polarized retroreflective bin-picking sensor
TAKEX SSP-M32R 12 mm slim polarized retroreflective bin-picking sensor
TAKEX_SSP-M32R

12 mm Slim Polarized Retroreflective Bin-Picking Sensor

  • TAKEX SSP-M32R is a 12 mm slim polarized retroreflective bin-picking sensor with two optical axes, a 40 mm sensing width, and a 60–300 mm reflector setting range.
  • It features green JOB and red FAULT indicators, NPN output, 1 ms response, and one-side wiring.
  • Brand TAKEX Takenaka Engineering Co., Ltd.
：
Add to Inquiry Cart
Features
  • 12 mm slim body: The sensor is only 12 mm thick, reducing installation space and minimizing obstruction around parts bins and picking areas.
  • One-side retroreflective wiring: The emitter and receiver are integrated into the sensor body, with only an S-SSP70 reflector installed on the opposite side for simplified bin wiring.
  • Large green JOB indicator: A high-intensity green indicator on the side of the sensor clearly shows the operator which picking location requires action.
  • Red FAULT indicator: A large red indicator provides a visible warning when an incorrect picking location is accessed.
  • 1 ms response with NPN output: The sensor provides NPN open-collector output, Dark-ON operation, 1 ms or less response, and output short-circuit protection.
Specification
ItemSpec.
Product typePolarized retroreflective bin-picking sensor
ModelSSP-M32R
Detection methodPolarized retroreflective
ReflectorS-SSP70
Reflector setting range60–300 mm
Number of optical axes2
Detecting width40 mm
Body thickness12 mm
Power supply12–24VDC ±10%, ripple 10% or less
Current consumption60 mA or less
Control outputNPN open collector
Operation modeDark-ON
Response time1 ms or less
Light source630 nm red LED
JOB indicatorGreen LED
JOB indicator inputContact or non-contact input
JOB operating voltageNPN: 2 V or less
FAULT indicatorRed LED
Operation indicatorOrange LED
JOB / FAULT indicationContinuous lighting
Case materialABS
Indicator windowPolycarbonate
Optical windowAcrylic
Ambient light5,000 lx or less
Operating temperature−10 to +55°C, non-freezing
Ambient humidity35–85% RH, non-condensing
Protective structureIP40
WeightApprox. 60 g including cable

Specification notes

  • The 60–300 mm specification is the reflector setting range when using S-SSP70. Objects can still be detected close to the sensor body when they interrupt the optical path.
  • JOB and FAULT provide operator guidance: the green JOB indicator identifies the intended picking position, while the red FAULT indicator warns of an incorrect picking action.
  • Keep the M4 mounting screw and nut tightening torque at 0.8 N·m or less. The S-SSP70 reflector is included with the sensor.
FAQ

Q1: What is the TAKEX SSP-M32R?
A: SSP-M32R is a polarized retroreflective bin-picking sensor designed to confirm parts-picking operations and provide visual operator guidance.


Q2: What detection method does SSP-M32R use?
A: It uses polarized retroreflective sensing with the sensor body installed opposite the S-SSP70 reflector.


Q3: What is the detecting range?
A: The S-SSP70 reflector can be installed 60–300 mm from the sensor.


Q4: How many optical axes does SSP-M32R have?
A: It has two optical axes with a 40 mm detecting width.


Q5: Why is SSP-M32R suitable for parts bins?
A: Its body is only 12 mm thick, and the retroreflective design requires wiring only on the sensor side, reducing wiring and installation space inside the rack.


Q6: What is the green JOB indicator used for?
A: The large green JOB indicator identifies the location where the operator should perform the picking operation.


Q7: What is the red FAULT indicator used for?
A: The red FAULT indicator provides a visible warning when an incorrect picking location is accessed.


Q8: What output does SSP-M32R provide?
A: It provides an NPN open-collector output rated for sink current up to 100 mA at 30VDC and operates in Dark-ON mode.


Q9: What is the response time?
A: The response time is 1 ms or less.


Q10: What accessories are available?
A: The S-SSP70 reflector is supplied with the sensor, and the SSP-BF32 protective cover is available as an option.

Back to List
0
Go top