Close
Search
Banner Banner
Products
請選擇分類
TAKEX_FU1001BC

115°C heat-resistant U-shaped through-beam fiber optic units

  • TAKEX FU1001BC, FU1002BC, and FU1004BC are heat-resistant U-shaped through-beam fiber optic units with 5 mm fixed sensing gaps.
  • Rated up to +115°C and +105°C for continuous use, they feature 2 m free-cutting fibers and R15 bending radii.
  • Brand TAKEX Takenaka Engineering Co., Ltd.
Features
  • 115°C heat-resistant design: All three models are rated for ambient temperatures up to +115°C, with continuous operation limited to +105°C, making them suitable for industrial equipment requiring heat resistance.
  • 5 mm fixed-gap U-shaped sensing: The transmitter and receiver positions are integrated into a single U-shaped sensing head with a fixed 5 mm optical gap, eliminating separate optical-axis alignment.
  • Three mounting configurations: FU1001BC, FU1002BC, and FU1004BC have different sensing head geometries and mounting hole arrangements for installations based on photo-microsensor designs.
  • 2 m heat-resistant free-cutting fibers: All models feature 2 m free-cutting fibers with heat-resistant polyethylene coverings, φ1.0 mm cable diameters, and R15 allowable bending radii.
  • Multiple amplifier compatibility: The models support F2R, F70, F80R, and F85RN fiber amplifiers. The fixed sensing gap remains unchanged across amplifier operating modes.
Specification
ItemSpec.
ModelsFU1001BC
FU1002BC
FU1004BC
Product typeHeat-resistant U-shaped through-beam fiber optic unit
Detection methodThrough beam
Environmental featureHeat resistant
Tip appearanceU-shaped
Fixed sensing gap5 mm
Feature115°C heat resistance, photo-microsensor type
Mounting holesFU1001BC: 2 × Φ3.2 mm
FU1002BC: 2 × Φ3.2 mm
FU1004BC: 2 × Φ3.5 mm
Sensing head materialAluminum (white anodized)
F80R long-distance mode5 mm
F80R high-speed mode5 mm
F70R/F70AR5 mm
F71R5 mm
F2R5 mm
Fiber length2 m, free-cutting
Fiber cable diameterΦ1.0 mm
Fiber core diameterΦ0.5 mm
Allowable bending radiusR15 (15 mm)
Ambient temperature−30 to +115°C
Max. continuous operating temperature+105°C
Fiber covering materialHeat-resistant polyethylene
Fiber core materialPlastic
Standard detectable object diameterΦ2 mm
Min. detectable object diameterΦ0.03 mm (excluding F71R and F2R)
Applicable amplifiersF2R, F70, F80R, F85RN

Specification notes

  • Fixed sensing gap and mounting differences: All three models have a fixed 5 mm U-shaped sensing gap. They differ in sensing head geometry and mounting hole arrangement. FU1001BC and FU1002BC use Φ3.2 mm mounting holes, while FU1004BC uses Φ3.5 mm holes.
  • Heat resistance and operating limits: The ambient temperature range is −30 to +115°C, but continuous operation must remain at or below +105°C. Confirm actual equipment temperatures and operating duration before installation.
  • Fiber routing and amplifier compatibility: All models feature 2 m free-cutting fibers with Φ1.0 mm cable diameters, Φ0.5 mm cores, and R15 allowable bending radii. The U-shaped sensing gap remains fixed at 5 mm with different amplifier configurations.
FAQ

Q1: What are TAKEX FU1001BC, FU1002BC, and FU1004BC?
A: They are heat-resistant U-shaped through-beam fiber optic units with 5 mm fixed sensing gaps for non-contact object detection using compatible fiber amplifiers.


Q2: What are the main differences among these three models?
A: The primary differences are sensing head geometry and mounting hole arrangements. Their sensing gaps, heat resistance, and fiber cable specifications are the same.


Q3: What is the sensing gap of FU1001BC, FU1002BC, and FU1004BC?
A: All three models have a fixed 5 mm sensing gap, determined by the integrated transmitter and receiver positions.


Q4: What is the maximum operating temperature of these models?
A: The maximum ambient operating temperature is +115°C, while continuous operation is limited to +105°C.


Q5: Can these U-shaped fibers operate continuously at 115°C?
A: No. Continuous operation must remain at or below +105°C. The +115°C rating is not the continuous operating temperature limit.


Q6: Can these models replace photo-microsensors?
A: Their U-shaped sensing heads can be evaluated for installations based on photo-microsensor designs. Verify mechanical dimensions, detection requirements, and the electrical interface of the required fiber amplifier before replacement.


Q7: Can FU1001BC, FU1002BC, and FU1004BC fibers be cut to length?
A: Yes. All three models include 2 m free-cutting fiber cables that can be trimmed to meet installation requirements.


Q8: What is the allowable bending radius of these models?
A: All three models have an R15 (15 mm) allowable fiber bending radius, which must be observed during cable routing.


Q9: Which fiber amplifiers are compatible with these models?
A: The models support F2R, F70, F80R, and F85RN fiber amplifiers. The fixed sensing gap remains 5 mm regardless of the selected amplifier mode.


Q10: How should I choose among these 115°C heat-resistant U-shaped fibers?
A: First confirm the operating temperature and continuous-use requirements. Then compare the sensing head geometry, mounting hole locations, 5 mm fixed gap, and available cable routing space.

0
Go top