FAQ
Q1: What is the TAKEX FZ801BC, and does it need an amplifier?
A: The FZ801BC is a convergent reflective fiber optic unit that guides light to a target and collects the reflected light. A compatible fiber amplifier determines whether the target is present and provides the output signal.
Q2: Can one FZ801BC detect PCBs of different colors at the same station?
A: Yes. The FZ801BC detects board presence from one side. When changing boards, check the received light level for each board color with the head in its installed position, then set the threshold for board presence and absence.
Q3: How much space should I allow in the mounting fixture?
A: The head measures 20 × 20 × 8 mm and is 8 mm thick. The two M3 tapped holes on the side are also 8 mm apart, center to center. Leave additional clearance for the fibers to exit and bend.
Q4: How far should the sensing head be from the PCB with an F70R amplifier?
A: The specified detecting distance with the F70R is 30 mm. Use that distance from the sensing face to the board surface as your starting point and verify detection with an actual board. If board height varies, test both extremes.
Q5: Can I mount the head farther away by switching the F80R to long-distance mode?
A: With the FZ801BC, the F80R provides a 30 mm detecting distance in both long-distance and high-speed modes. If the fixture requires a greater working distance, select a fiber unit rated for that distance.
Q6: What does the Ø0.015 mm specification mean?
A: It is the minimum detectable object diameter and excludes the F71R amplifier. It describes the ability to detect a small object's presence. Measuring line width or position requires separate resolution and accuracy specifications.
Q7: Can I shorten the 2 m cable to fit my machine?
A: Yes. Measure the route from the sensing head to the amplifier, including the length needed around bends, before cutting the cable to length.
Q8: How tightly can I bend the fiber at a cable duct corner?
A: The minimum bend radius is 30 mm. Check the tightest turn along the route and make sure it meets that radius before securing the fiber.
Q9: What is the operating temperature range of the FZ801BC?
A: The fiber optic unit is rated for −30 to +70 °C. If the head is near a heat source, check the temperature at the head and at the amplifier against each component's rating.
Q10: How do I choose between the FZ801BC, FZ802BC, and FZ804BC?
A: Start with the distance from the sensing face to the target. With the F85RN in long-distance mode, the FZ801BC is rated for 30 mm, the FZ802BC for 0–5 mm, and the FZ804BC for 5–17 mm. Then check mounting clearance. The FZ801BC head is 8 mm thick, and the other two are 3 mm thick.