FAQ
Q1: How do the FZ802BC and FZ804BC detect a part, and do they need an amplifier?
A: Both are convergent reflective fiber optic units. Each head transmits and receives light from the same side of the part. A compatible fiber amplifier determines whether the part is present and provides the output signal.
Q2: Which model should I choose for a 2 mm or 10 mm gap?
A: With an F85RN in long-distance mode, a 2 mm gap is within the FZ802BC range of 0–5 mm. A 10 mm gap is within the FZ804BC range of 5–17 mm. Include any change in gap while the machine is running.
Q3: Which model works best if the part moves around the 5 mm position?
A: With the F85RN in long-distance mode, 5 mm is the max. distance for the FZ802BC and the min. distance for the FZ804BC. If the gap varies from 4 to 6 mm, reposition the head so the full travel falls within one model’s range, then test at both ends.
Q4: Can both 3 mm heads use the same mounting holes?
A: Check the fixture pattern first. The FZ802BC has two 3.5 × 7.5 mm slots on 10 mm centers. The FZ804BC has two Ø3.5 mm round holes on 7 mm centers, with the holes arranged in a different direction.
Q5: Which head can I use with an existing F70R or F71R amplifier?
A: The F70R works with both heads. Its detecting distance is 0–5 mm with the FZ802BC and 5–17 mm with the FZ804BC. If you are keeping an F71R, use the FZ802BC for a range of 0–5 mm.
Q6: Does Ø0.015 mm refer to the light spot or to the detectable part?
A: It specifies the min. detectable object diameter. The value excludes the FZ802BC paired with an F71R. To confirm reliable detection of a small part, test that part at the intended mounting position.
Q7: Can the fibers be shortened, and how much routing clearance do they need?
A: Both units have 2 m cut-to-length fibers. Measure the route from the head to the amplifier, including the length around each bend, before cutting. Maintain at least a 15 mm bend radius at every turn.
Q8: Which head body fits if my fixture has only 12 mm of height?
A: In the orientation shown in the drawings, the FZ804BC body is 10 mm high and the FZ802BC is 18 mm high. The FZ804BC body fits within 12 mm of height. Also check fastener clearance, the fiber exit path, and the distance to the target.
Q9: What is the ambient operating temperature range?
A: Both fiber optic units are rated for −30 to +70 °C. If the head and amplifier are mounted in different locations, check each location against the temperature rating of the component installed there.
Q10: Which model can I compare if the head needs to sit 30 mm from the target?
A: Consider the TAKEX FZ801BC convergent reflective fiber optic unit. It has a specified detecting distance of 30 mm with an F70R amplifier and an 8 mm thick head. Check the available thickness and mounting hole pattern before selecting it.