Close
Search
Banner Banner
Products
請選擇分類
TAKEX_GTHN605V

M4/M2.6 Flange-Coupled Vacuum Through-Beam Fiber Units

  • TAKEX GTHN605V/GTHN610V/GTHN615V/GTHN620V are M4/M2.6 flange-coupled vacuum through-beam fibers. In F100R long mode, the 0.5, 1, 1.5, and 2 m models reach 900, 850, 800, and 700 mm, respectively. Glass fiber in stainless steel spiral tubing is rated for −30 to +350°C with a 30 mm min. bend radius.
  • Brand TAKEX Takenaka Engineering Co., Ltd.
Features
  • Through-beam sensing on the vacuum side: The transmitting and receiving heads face each other across the sensing point. A part interrupts the beam as it passes between them.
  • Two threads on the same head: The body has an M4 × 0.7 mm thread and the tip has an M2.6 × 0.45 mm thread. At the other end, the flange clamping ring has an M8 thread.
  • Four vacuum-side cable lengths: Choose a 0.5, 1, 1.5, or 2 m cable to reach from the flange to the sensing point. Each length has its own orderable model number.
  • Detecting distance by amplifier mode: With the F100R, the 1 m GTHN610V reaches 850 mm in long-distance mode and 300 mm in high-speed mode.
  • Glass fiber in a stainless steel spiral tube: The fiber unit has an ambient temperature range of −30 to +350°C. Allow a bend radius of at least 30 mm when routing the cable.
Specification
ItemSpec.
ModelsGTHN605V
GTHN610V
GTHN615V
GTHN620V
Detection methodThrough-beam
Location / connectionVacuum side / flange
Vacuum-side fiber length L (m)GTHN605V: 0.5
GTHN610V: 1
GTHN615V: 1.5
GTHN620V: 2
Head body thread (size × pitch)M4 × 0.7 mm
Tip thread (size × pitch)M2.6 × 0.45 mm
Flange clamping ring (OD / thread)Φ10 mm / M8
F100R long-distance mode (mm)GTHN605V: 900
GTHN610V: 850
GTHN615V: 800
GTHN620V: 700
F100R high-speed mode (mm)GTHN605V: 350
GTHN610V: 300
GTHN615V: 250
GTHN620V: 220
F85RN long-distance mode (mm)590
F85RN high-speed mode (H-SP) (mm)160
F80R long-distance mode (mm)GTHN605V: 480
GTHN610V: 450
GTHN615V: 430
GTHN620V: 380
F80R high-speed mode (mm)GTHN605V: -
GTHN610V: -
GTHN615V: -
GTHN620V: 210
F70R / F70AR detecting distance (mm)GTHN605V: -
GTHN610V: 250
GTHN615V: 240
GTHN620V: 210
XF12R-A long-distance mode (mm)240
XF12R-A high-speed mode (H-SP) (mm)100
Standard detectable object diameter (mm)Φ1.2
Detectable object diameter, min. (mm)Φ1.0
Fiber / protective tubeGlass / stainless steel spiral tube
Cable OD / glass fiber bundle diameter (mm)Φ2.9 / Φ1.5
Bend radius, min. (mm)30
Fiber unit ambient temperature (°C)−30 to +350

Specification notes

  • Measure the cable route from the flange to the sensing head to select length L. Measure the gap between the transmitting and receiving heads separately to determine the required sensing distance.
  • Each distance applies to the amplifier and mode shown in that row. A dash marks a combination for which no distance is given here.
  • Allow at least a 30 mm radius at each bend. The temperature range applies to the vacuum-side fiber unit. Check the separate ratings for the atmospheric-side fiber and amplifier.
FAQ

Q1: Which side of the vacuum chamber do these units go on?
A: All four install on the vacuum side and connect at a flange. Mount the transmitting and receiving heads opposite each other so a part passing between them interrupts the beam.


Q2: How do the GTHN605V, GTHN610V, GTHN615V, and GTHN620V differ?
A: Their vacuum-side cable lengths are 0.5, 1, 1.5, and 2 m, respectively. They share the same head threads, but their detecting distances differ when paired with the F100R.


Q3: Where are the M4, M2.6, and M8 threads?
A: The sensing head has an M4 × 0.7 mm body thread and an M2.6 × 0.45 mm tip thread. The M8 thread is on the flange clamping ring at the other end of the cable.


Q4: Which model provides a 1.5 m cable and an 800 mm sensing distance?
A: The GTHN615V has a 1.5 m cable and reaches 800 mm with the F100R in long-distance mode. The 2 m GTHN620V reaches 700 mm in the same mode.


Q5: Does the GTHN605V still reach 900 mm if I switch the F100R to high-speed mode?
A: The 900 mm rating applies in long-distance mode. In high-speed mode, the GTHN605V is rated for 350 mm. Use the rating for the selected mode when setting the gap between the heads.


Q6: If I use an F85RN, does the detecting distance change with cable length?
A: All four models have the same F85RN ratings within each mode. Long-distance mode provides 590 mm and high-speed mode (H-SP) provides 160 mm, so you can select the length that fits the vacuum-side cable route.


Q7: Does Ø1.0 mm refer to the target or the fiber?
A: It is the min. detectable object diameter. The standard detectable object diameter is Ø1.2 mm. The cable measures Ø2.9 mm overall, and the glass fiber bundle measures Ø1.5 mm.


Q8: How much room do I need at a bend inside the chamber?
A: All four models have a min. bend radius of 30 mm. Maintain that radius or larger wherever the cable turns along a fixture or chamber wall.


Q9: Which components does the +350°C rating cover?
A: The −30 to +350°C ambient temperature rating applies to these four vacuum-side fiber units. Use the separate temperature ratings for the flange, atmospheric-side fiber, and amplifier when specifying the system.


Q10: Which fiber can I cut to length on site?
A: The FT7VGBC is the 2 m cut-to-length fiber for the atmospheric side of the flange. On the vacuum side, select the GTHN model with the required 0.5, 1, 1.5, or 2 m length.

0
Go top