Close
Search
Banner Banner
Products
請選擇分類
TAKEX_GTSHN705V

M4 Right-Angle Through-Beam Fiber Units for Vacuum Flanges

  • TAKEX GTSHN705V, GTSHN710V, GTSHN715V, and GTSHN720V are vacuum through-beam fiber units. M4 right-angle heads detect beam breaks and route the cable sideways to the flange. The 0.5, 1, 1.5, and 2 m models have sensing ranges of 900, 850, 800, and 700 mm, respectively, in F100R long-distance mode.
  • Brand TAKEX Takenaka Engineering Co., Ltd.
Features
  • Through-beam detection inside the chamber: The transmitting and receiving heads face each other across the object path. An object interrupts the beam as it passes, and the fibers connect to the atmospheric side through a relay flange.
  • Right-angle cable exit: The cable exits perpendicular to the sensing axis. The distance from the sensing face to the cable centerline is 29.5 mm, a useful dimension for checking fixture clearance.
  • Four vacuum-side cable lengths: Choose the cable for the route from the head to the flange. The GTSHN705V is 0.5 m, the GTSHN710V is 1 m, the GTSHN715V is 1.5 m, and the GTSHN720V is 2 m.
  • Sensing range by amplifier mode: With the 1 m GTSHN710V and an F100R amplifier, the rated gap is 850 mm in long-distance mode and 300 mm in high-speed mode.
  • Glass fiber in stainless steel spiral tubing: The vacuum-side fiber unit has an ambient temperature range of −30 to +350 °C. Maintain a bend radius of at least 30 mm along the spiral tubing.
Specification
ItemSpec.
ModelsGTSHN705V
GTSHN710V
GTSHN715V
GTSHN720V
Detection method and locationThrough-beam, flange connection, vacuum side
Vacuum-side cable length L (m)GTSHN705V: 0.5
GTSHN710V: 1
GTSHN715V: 1.5
GTSHN720V: 2
Sensing head thread (size × pitch)M4 × 0.7 mm
Threaded length at sensing head12 mm
Sensing face to cable centerline29.5 mm
Formed elbow radius10 mm
Flange clamping ring (OD / thread)Φ10 mm / M8
Fiber material / protective tubingGlass / stainless steel spiral tube
Cable OD / glass fiber bundle diameterΦ2.9 mm / Φ1.5 mm
Cable bend radius, min.30 mm
Fiber unit ambient temperature−30 to +350 °C
Standard / min. detectable object diameterΦ1.2 mm / Φ1.0 mm
F100R long-distance mode (mm)GTSHN705V: 900
GTSHN710V: 850
GTSHN715V: 800
GTSHN720V: 700
F100R high-speed mode (mm)GTSHN705V: 350
GTSHN710V: 300
GTSHN715V: 250
GTSHN720V: 220
F85RN long-distance mode (mm)GTSHN705V: 510
GTSHN710V: 510
GTSHN715V: 510
GTSHN720V: -
F85RN high-speed mode (H-SP) (mm)GTSHN705V: 130
GTSHN710V: 130
GTSHN715V: 130
GTSHN720V: -
F80R long-distance mode (mm)GTSHN705V: 480
GTSHN710V: 450
GTSHN715V: 430
GTSHN720V: 380
F80R high-speed mode (mm)GTSHN705V: -
GTSHN710V: -
GTSHN715V: -
GTSHN720V: 210
F70R / F70AR detecting distance (mm)GTSHN705V: 270
GTSHN710V: 250
GTSHN715V: 240
GTSHN720V: 210
XF12R-A long-distance mode (mm)240
XF12R-A high-speed mode (H-SP) (mm)100

Specification notes

  • Choose cable length for the route to the flange, then check the head-to-head gap for the selected mode. The GTSHN720V has a 2 m cable and a 700 mm sensing range in F100R long-distance mode.
  • Use the 10 mm elbow radius to check clearance around the formed metal head. Allow a bend radius of at least 30 mm where the cable follows the chamber wall.
  • A dash marks a combination with no distance listed here. For high-speed operation, use the high-speed entry in the column for your fiber model.
FAQ

Q1: Where do these four TAKEX fiber units go in a vacuum system?
A: They install inside the vacuum chamber and connect through a flange. The transmitting and receiving heads face each other to detect an object passing through the beam.


Q2: Which model fits my cable route?
A: Measure the route from the head to the flange. Choose GTSHN705V for 0.5 m, GTSHN710V for 1 m, GTSHN715V for 1.5 m, or GTSHN720V for 2 m. Then check the sensing range for your amplifier.


Q3: Does the sensing fixture take an M4 or an M8 thread?
A: The sensing head has an M4 × 0.7 mm thread with a 12 mm threaded length. The M8 thread is on the flange clamping ring, which has a 10 mm outside diameter.


Q4: Which dimension matters when space behind the head is limited?
A: Allow 29.5 mm from the sensing face to the cable centerline, measured along the sensing axis. The cable then exits sideways. For a straight cable exit, compare an M4 straight-head model such as the GTHN705V.


Q5: How do the R10 and R30 dimensions apply?
A: R10 is the radius of the formed metal elbow. R30 is the min. bend radius of the fiber cable. Allow at least 30 mm of bend radius along the spiral tubing after it exits the elbow.


Q6: Which cable lengths support an 800 mm gap with the F100R?
A: In long-distance mode, GTSHN705V, GTSHN710V, and GTSHN715V are rated for 900, 850, and 800 mm, respectively. The longest cable that meets an 800 mm gap is the 1.5 m GTSHN715V. The 2 m GTSHN720V is rated for 700 mm in this mode.


Q7: What gap does GTSHN715V support in F85RN high-speed mode?
A: The GTSHN715V is rated for 130 mm in F85RN high-speed mode (H-SP) and 510 mm in long-distance mode. Use the 130 mm rating when setting the fixture spacing for H-SP.


Q8: What is the smallest detectable object diameter?
A: All four models have a min. detectable object diameter of 1.0 mm and a standard detectable object diameter of 1.2 mm. Check object diameter and head spacing separately.


Q9: Which fiber can I cut to length on site?
A: Select one of the four cable lengths for the vacuum side. Use the FT7VGBC free-cutting fiber on the atmospheric side of the flange to match the run to the amplifier.


Q10: Which component carries the +350 °C rating?
A: The −30 to +350 °C ambient range applies to these four vacuum-side fiber units. Use the individual temperature ratings for the relay flange, atmospheric-side fiber, and amplifier.

0
Go top