Thin Lip Suction Cups
| Model | Pad diameter (mm) | Material code | Weight (g) (N / S / F / NE / SE) |
|---|---|---|---|
| PAG-5B | Φ5 | N / S / F / NE / SE | 0.1 / 0.1 / 0.1 / 0.1 / 0.1 |
| PAG-10A | Φ10 | N / S / F / NE / SE | 0.3 / 0.3 / 0.5 / 0.3 / 0.3 |
| PAG-10B | Φ10 | N / S / F / NE / SE | 0.3 / 0.3 / 0.5 / 0.4 / 0.3 |
| PAG-15A | Φ15 | N / S / F / NE / SE | 0.4 / 0.4 / 0.6 / 0.4 / 0.4 |
| PAG-15B | Φ15 | N / S / F / NE / SE | 0.4 / 0.4 / 0.6 / 0.4 / 0.4 |
| PAG-20A | Φ20 | N / S / F / NE / SE | 0.6 / 0.6 / 1.0 / 0.7 / 0.6 |
| PAG-20B | Φ20 | N / S / F / NE / SE | 0.7 / 0.7 / 1.1 / 0.7 / 0.7 |
| PAG-25 | Φ25 | N / S / F / NE / SE | 19.6 / 19.6 / 20.8 /19.7 / 19.6 |
| PAG-30 | Φ30 | N / S / F / NE / SE | 19.9 / 19.9 / 21.3 / 20.1 / 19.9 |
| PAG-30B | Φ30 | N / S / F / NE / SE | 3.1 / 3.1 / 5.0 / 3.3 / 3.1 |
| PAG-40 | Φ40 | N / S / F / NE / SE | 20.0 / 20.0 / 21.4 / 20.2 / 20.0 |
| PAG-50 | Φ50 | N / S / F / NE / SE | 22.0 / 22.0 / 24.6 / 22.3 / 22.0 |
Note: The catalog provides assembled types (e.g., fixed fitting PATK/YK and spring fitting types), including port direction (top/side) and connector tables.
Q1: What workpieces are PA cups designed for?
A: Smooth, pliable workpieces such as paper or vinyl sheets.
Q2: What is the benefit of a thin lip?
A: It helps conform to smooth, pliable surfaces for stable suction.
Q3: How do I choose the right pad diameter?
A: Start with the available effective contact area and leakage tendency, then select a pad diameter that provides sufficient contact area. Finally, confirm cycle time and suction stability under actual conditions.
Q4: What material options are available?
A: NBR, silicone, fluorine rubber, and conductive options.
Q5: When should I use conductive materials?
A: When ESD control is required, evaluate conductive options and ensure proper grounding.
Q6: What fitting options are available?
A: Fixed fitting (PATK/YK) and spring fitting lineups are available depending on model tables.
Q7: What is the fastest way to select a model?
A: Choose pad diameter and material first, then select port direction (top/side) and the fitting type using the catalog model tables.
Q8: What should I check before final selection?
A: For dust/leakage or limited contact area, adjust diameter/material and validate stability by actual tests.
